IBM TotalStorage SAN256N Director 2045-N16, Installation And Maintenance Manual, Page: 68 / 157

SAN256N Director 2045-N16
48
4. In the Install from Disk dialog box, select the CD-ROM drive the system CD is in,
and then click OK.
5. A list of modems appears. Select MultiTech MT5600BA from the list, and then click
Next.
6. Select the port the modem is connected to (COM 1), and then click Next.
7. Windows will install and configure the modem.
8. Click Finish to exit.
9. Proceed with configuring the modem for the destination country.
Configuring the modem for a destination country
Different countries have different requirements for how modems must function.
Therefore, you must configure the modem to match the communication defaults of the
country it will be used.
Using the global wizard utility
1. Insert the MT5600BA System CD into the CD-ROM drive. The Autorun dialog box
appears.
2. Click Initial Setup and Country Selection. The Global Wizard dialog box appears.
Click Next.
3. View the Global Wizard as it searches for the modem and identifies it. Click Next.
4. Select the country in which the modem will be used, and then click Next.
5. Review the choice of country. If it is correct, click Next to configure the modem.
6. When the Global Wizard message states that the parameters have been set, click
Finish to exit.
Installing Enterprise Manager
This section contains cross-references to procedures that describe how to install the
Enterprise Manager Server and Client software, discover a fabric, and enter fabric
settings. It also includes startup procedures and a procedure used to assign and enable
Enterprise Manager features that are licensed to the customer.
This section assumes a working knowledge of the Windows operating system, including
its window principles and operations, command key structures, and file organization.
Windows 2000® should already be installed on the machine to which you wish to install
the Enterprise Manager Server, the Enterprise Manager Client, and the Java Runtime
Environment (JRE) required to support the Client platform. It provides information to
assist you in installing the Enterprise Manager, logging on, and defining the Enterprise
Manager Network.