IBM TotalStorage SAN256N Director 2045-N16, Installation And Maintenance Manual, Page: 14 / 157

SAN256N Director 2045-N16
xii
DANGER
Electrical voltage and current from power, telephone, and communication cables are
hazardous.
To avoid a shock hazard:
• Do not connect or disconnect any cables or perform installation, maintenance, or
reconfiguration of this product during an electrical storm.
• Connect all power cords to a properly wired and grounded electrical outlet. Ensure
outlet supplies proper voltage and phase rotation according to the system rating plate.
• Connect any equipment that will be attached to this product to properly wired outlets.
• When possible, use one hand only to connect or disconnect signal cables.
• Never turn on any equipment when there is evidence of fire, water, or structural
damage.
• Disconnect the attached power cords, telecommunications systems, networks, and
modems before you open the device covers, unless instructed otherwise in the
installation and configuration procedures.
• Connect and disconnect cables as described below when installing, moving, or
opening covers on this product or attached devices.
To Disconnect:
• Turn everything OFF (unless instructed otherwise).
• Remove power cords from the outlet.
• Remove signal cables from connectors.
• Remove all cables from devices.
To Connect:
1. Turn everything OFF (unless instructed otherwise).
2. Attach all cables to devices.
3. Attach signal cables to connectors.
4. Attach power cords to outlet.
5. Turn device ON.
(D005)