IBM TotalStorage FAStT600, Installation And User Manual

Page: 95 / 134

After removing the fibre-channel cables, insert the protective caps.
4. Use the following procedure to remove the SFPs from the RAID controller that
has failed.
a. Remove the LC-LC fibre-channel cable from the SFP module. For more
information, see “Handling fiber-optic cables” on page 27.
b. Unlock the SFP module latch:
v For SFP modules that contain plastic tabs, unlock the SFP module latch
by pulling the plastic tab outward 10°, as shown in Figure 51.
v
For SFP modules that contain wire tabs, unlock the SFP module latch by
pulling the wire latch outward 90°, as shown in Figure 26 on page 30.
SFP module
Raid controller
Fiber-optic
cable
Figure 50. Location of SFPs and fiber-optic cables
Protective cap
SFP module
10
o
Plastic tab
Figure 51. Unlocking the SFP module latch - plastic variety
Chapter 5. Installing and replacing components
65