IBM TotalStorage FAStT600, Installation And User Manual

Page: 90 / 134

Levers
Use these locking handles to remove or install a power supply.
Power LED
These green LEDs light when the storage server is turned on and receiving
ac power.
Fault LEDs
These amber LEDs light if a power supply failure occurs or if the power
supply is turned off.
AC power switches
Use these switches to turn the power supplies on and off. You must turn on
both switches to take advantage of the redundant power supplies.
AC power connectors
This connection is for the ac power cord.
Strain-relief clamp
Use this clamp to provide strain relief on the power cord.
Removing a hot-swap power supply
Statement 8
AC power
switch
AC power
switch
Power LED
Power LED
Fault LED
Fault LED
Lever
Lever
AC power
connector
AC power
connector
Hot-swap power
supplies
Strain-
relief clamp
Strain-
relief clamp
Figure 45. Power supply controls
60
IBM TotalStorage FAStT600 Fibre Channel Storage Server: Installation and User’s Guide