IBM TotalStorage FAStT600, Installation And User Manual

Page: 64 / 134

For details about power requirements, see “Operating specifications” on
page 8.
5. Go to “Turning the storage server on and off” on page 37 for the initial startup of
the storage server.
Installing the storage-management software
Install the storage-management software by using the procedures in the software
Installation and Support Guide for your operating system. Use that document and
the online help to configure the logical drives, partitions, and so on for the RAID
controllers. Use your operating system documentation to make the new logical
drives accessible to the operating system.
Note: Make sure that you start the storage-management software to continuously
monitor the status of the storage server. For information about the
importance of this information, see “Monitoring status through software” on
page 41.
AC distribution unit
power cord
Controller power supplies
Drive expansion unit
power supplies
Ladder cable connector
Ladder cable
AC distribution units
Figure 32. Redundant AC power connections to controllers and drive expansion units
34
IBM TotalStorage FAStT600 Fibre Channel Storage Server: Installation and User’s Guide
|
|
|
|
|
|
|
|