![background image](http://html1.mh-extra.com/html/ibm/totalstorage-3534-f08/totalstorage-3534-f08_installation-manual_3529687012.webp)
2. Ensure that all latches and hinges are in correct operating condition.
3. If the 3534 Model F08 is not installed in a rack cabinet, check for loose or
broken feet.
4. Check the power cord for damage.
5. Check the external signal cable for damage.
6. Check the cover for sharp edges, damage, or alterations that expose the
internal parts of the device.
7. Correct any problems that you find.
Checking the safety labels
Perform the following safety label checks:
1. Verify that the power supply cover caution label shown in Figure 1 is installed on
the power supply of the 3534 Model F08.
CAUTION:
Do not remove cover, do not service, no serviceable parts. (2)
2. Verify that the small form-factor pluggable device (SFP) label shown in Figure 2
and Figure 3 on page xi is installed on the 3534 Model F08.
SJ000337
Figure 1. Power supply cover caution label
SJ000317
Figure 2. SFP label (front view)
x
IBM TotalStorage
™
SAN Fibre Channel Switch: 3534 Model F08 Installation Guide
Summary of Contents for TotalStorage 3534-F08
