IBM TotalStorage 3534-F08 Installation Manual Download Page 12

Page: 12 / 81

2. Ensure that all latches and hinges are in correct operating condition.

3. If the 3534 Model F08 is not installed in a rack cabinet, check for loose or

broken feet.

4. Check the power cord for damage.

5. Check the external signal cable for damage.

6. Check the cover for sharp edges, damage, or alterations that expose the

internal parts of the device.

7. Correct any problems that you find.

Checking the safety labels

Perform the following safety label checks:

1. Verify that the power supply cover caution label shown in Figure 1 is installed on

the power supply of the 3534 Model F08.

CAUTION:
Do not remove cover, do not service, no serviceable parts. (2)

2. Verify that the small form-factor pluggable device (SFP) label shown in Figure 2

and Figure 3 on page xi is installed on the 3534 Model F08.

SJ000337

Figure 1. Power supply cover caution label

SJ000317

Figure 2. SFP label (front view)

IBM TotalStorage

™

SAN Fibre Channel Switch: 3534 Model F08 Installation Guide

Summary of Contents for TotalStorage 3534-F08


















































































Search results

Summary of Contents for TotalStorage 3534-F08

Reviews:

Related manuals for TotalStorage 3534-F08

Brands by name

Popular brands

IBM TotalStorage 3534-F08, Installation Manual

Search results

Summary of Contents for TotalStorage 3534-F08

Reviews:

Related manuals for TotalStorage 3534-F08

Brands by name

Popular brands