Checking ac grounding
DANGER
An electrical outlet that is not correctly wired could place a hazardous
voltage on the metal parts of the system or the products that attach to the
system. It is the customer’s responsibility to ensure that the outlet is
correctly wired and grounded to prevent an electrical shock. (1)
Environmental notices and statements
This section describes the environmental notices and statements.
Battery notice
CAUTION:
A lithium battery can cause fire, explosion, or a severe burn. Do not recharge,
disassemble, heat above 100°C (212°F), solder directly to the cell, incinerate,
or expose cell contents to water. Keep away from children. Replace only with
the part number specified for your system. Use of another battery may
present a risk of fire or explosion. The battery connector is polarized; do not
attempt to reverse the polarity. Dispose of the battery according to local
regulations. (3)
Laser safety
This unit might contain a single-mode or a multimode transceiver Class 1 laser
product. The transceiver complies with IEC 825-1 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated under the recommended operating
conditions.
This equipment contains Class 1 laser products, and complies with FDA radiation
Performance Standards, 21 CFR Subchapter J and the international laser safety
standard IEC 825-2.
Usage restrictions
The optical ports of the modules must be terminated with an optical connector or
with a dust plug.
Product recycling
This unit contains recyclable materials. These materials should be recycled where
processing sites are available and according to local regulations. In some areas,
IBM provides a product take-back program that ensures proper handling of the
product. Contact your IBM representative for more information.
SJ000338
In the United States use only GBIC units or Fibre-Optic products that
comply with FDA radiation performance standards, 21 CFR Subchapter J.
Internationally use only GBIC units or Fibre-Optic products that comply
with IEC standard 825-1. Optical products that do not comply with these
standards may produce light that is hazardous to the eyes.
(4)
CAUTION:
xii
IBM TotalStorage
™
SAN Fibre Channel Switch: 3534 Model F08 Installation Guide
Summary of Contents for TotalStorage 3534-F08
