IBM TotalStorage 3534-F08, Installation Manual

Page: 17 / 81

About this book
This book describes how to plan for and install the IBM TotalStorage
™
SAN Fibre
Channel Switch 3534 Model F08, hereafter referred to as the 3534 Model F08.
Who should read this book
This book is intended for hardware service personnel who are responsible for
installing the 3534 Model F08 in a SAN fabric.
Throughout this book, the term switch applies to any IBM 3534 switch, unless the
reference is to a specific model.
Additional information
This section contains information about the 3534 Model F08 library, Web sites, and
how to get help and software updates.
3534 Model F08 library
Information related to this product can be found in the following publications:
v
IBM TotalStorage SAN Fibre Channel Switch 3534 Model F08 Installation Guide,
SY27-7631
v IBM TotalStorage SAN Fibre Channel Switch 3534 Model F08 User’s Guide,
GC26-7454
v
IBM TotalStorage SAN Fibre Channel Switch 3534 Model F08 Command
Reference, GC26-7455
v
IBM TotalStorage SAN Fibre Channel Switch 3534 Model F08 Translated Safety
Notices, GC26-7459
Web sites
To get specific details about models and firmware that the switch supports, see the
following Web site:
www.ibm.com/storage/fcswitch/
For detailed information about the fibre-channel standards, see the Fibre Channel
Association Web site at:
www.fibrechannel.com/
For a directory of worldwide contact information, including technical support, see the
following Web site:
www.ibm.com/contact/
Getting help
Contact your switch supplier for technical support. This includes hardware and
software support, all product repairs, and ordering of spare components.
Be prepared to provide the following information to the support personnel:
v
The switch serial number
v
The switch worldwide name
v The topology configuration
© Copyright IBM Corp. 2002
xv