IBM TotalStorage 201, User Reference Manual

Page: 116 / 140

Table 18. Diagnostic error messages (continued)
Error Code Meaning FRU/action
217-XXX-000 Failed BIOS hard disk drive
test
Note: If RAID is configured,
the hard disk drive number
refers to the RAID logical
array. Hard disk drive 1
217-XXX-001 Failed BIOS hard disk drive
test
Note: If RAID is configured,
the hard disk drive number
refers to the RAID logical
array. Hard disk drive 2
217-XXX-002 Failed BIOS hard disk drive
test.
Note: If RAID is configured,
the hard disk drive number
refers to the RAID logical
array Hard disk drive 3
217-XXX-003 Failed BIOS hard disk drive
test
Note: If RAID is configured,
the hard disk drive number
refers to the RAID logical
array. Hard disk drive 4
217-XXX-004 Failed BIOS hard disk drive
test
Note: If RAID is configured,
the hard disk drive number
refers to the RAID logical
array. Hard disk drive 5
217-XXX-005 Failed BIOS Fixed Disk test
Note: If RAID is configured,
the hard disk drive number
refers to the RAID logical
array. Hard disk drive 6
264-XXX-0NN Failed tape-drive test
1. Tape cartridge, if user executed the read/write tape
drive test (XXX = 256)
2. SCSI or power cable connected to tape drive with SCSI ID
NN.
3. Tape drive with SCSI ID NN (Refer to the Help and
Service Information appendix of the tape drive’s user
guide).
4. System board or SCSI Controller (Run SCSI controller
diagnostic to determine if the SCSI bus is functioning
correctly.)
264-XXX-999 Errors on multiple tape drives See error messages/text in the PC Doctor error log for
detailed information on each individual tape drive error.
301-XXX-000 Failed Keyboard test Keyboard
405-XXX-000 Failed Ethernet test on
controller on the system
board
1. Verify that Ethernet is not disabled in BIOS
2. System board
104
NAS 200 User’s Reference