IBM ThinkPad TransNote, Hardware Maintenance Manual

Page: 54 / 150

FRU replacement notices
This section contains notices related to removing and
replacing parts. Read this section carefully before replacing
any FRU.
Screw notices
Loose screws can cause a reliability problem. An IBM
ThinkPad computer addresses this problem with special
nylon-coated screws that have the following characteristics:
v
They maintain tight connections.
v
They do not easily come loose, even with shock or
vibration.
v
They are harder to tighten.
v
They should be used only once.
Do the following when you service this machine:
v
Keep the screw kit (for the P/N, see “Miscellaneous
parts” on page 141) in your tool bag.
v
Always use new screws.
v
Use a torque screwdriver if you have one.
Tighten screws as follows:
v
Plastic to plastic
Turn an additional 90 degrees after the screw head
touches the surface of the plastic part:
v
Logic card to plastic
Turn an additional 180 degrees after the screw head
touches the surface of the logic card:
v
Torque driver
If you have a torque driver, refer to the “Torque” column
for each step.
FRU replacement notices
50
ThinkPad TransNote