Using Easy-Setup
Config
Config contains the following:
Memory
Keyboard
Serial
Parallel
SystemBoard
Initialize
Exit
Memory
Memory shows the amount of installed memory and available
memory remaining.
Keyboard
Keyboard enables you to set the repeat-action (typematic) speed
and enables or disables the TrackPoint III.
Serial
Serial enables you to select the port address for a serial device
connected to the serial port, or for the internal serial device in the
diskette-drive compartment.
Parallel
Parallel enables you to select the port address for a device, such
as a printer, that is connected to the parallel connector. When you
select Bidirectional, the data transfer between the selected port
and the device is in both directions. When you select
Unidirectional, the data transfer is in only one direction: from the
computer to the device.
System
Board
SystemBoard provides information about the installed system
board.
Initialize
Initialize sets all items in the Config menu to their original values.
After verifying the selections, click on OK or press Enter. To cancel
the selections, press Esc.
Chapter 3. Operating Your Computer
43
All manuals and user guides at all-guides.com