IBM System Storage TS2900 Manual Download | Manualshive

Page: 6 / 130

background image

IBM TS2900 Tape Autoloader

Welcome to the IBM TS2900 Tape Autoloader online customer documentation, where you can ﬁnd information about how to install, maintain, and use the TS2900 Tape
Autoloader.

Getting started

Common tasks

Removal and Replacement Procedures

Parts List

Troubleshooting and Support

Troubleshooting

IBM tape storage support

<_div> <_div>

More information

Minimum ﬁrmware levels for common library features

Related publications

IBM Community (Community platform)

IBM Support content (Product support)

IBM Spectrum Archive Single Drive Edition documentation

Redbooks home page

©Copyright IBM Corporation 2017, 2020. Last updated: October 27, 2020.

Overview

The overview of the features and functions of the IBM® TS2900 Tape Autoloader is useful for high-level evaluation of the product and planning for the implementation of
the product.

Introduction

The IBM® TS2900 Tape Autoloader (Machine Type 3572) provides compact, high-capacity, low-cost solutions for simple, unattended data backup.

User interfaces

The library has two user interfaces: the Web User Interface and the Operator Panel.

Supported tape drives

The library supports a half-height tape drive with Serial Attached SCSI (SAS) interface.

Drive features

Supported tape cartridges

The library supports LTO tape cartridges.

Library functions

The library provides many speciﬁc functions, such as alerts and logging, random and sequential logical library modes, and encryption.

What's new

Read about information that is new or changed in this release of the IBM® TS2900 Tape Autoloader documentation.

New information

The following table lists the information that is new or changed in the TS2900 Tape Autoloader documentation.

TS2900 Tape Autoloader

1

«
...
4
5
6
7
8
...
»

Summary of Contents for System Storage TS2900



































































































































Reviews:

No comments

Related manuals for System Storage TS2900

Brand: Quest Engineering Pages: 64

Brand: Facilis Pages: 28

Brand: Gardiun Pages: 26

Brand: Icy Box Pages: 24

System Storage DCS Series

Brand: IBM Pages: 90

Brand: Clickfree Pages: 76

actiLib Autoloader 1U

Brand: Actidata Pages: 17

Brand: EDSLab Pages: 24

Brand: Toshiba Pages: 11

Brand: Aluratek Pages: 1

BUSH RANGER 3023BRK

Brand: ABSCO SHEDS Pages: 44

Brand: Costway Pages: 4

SuperServer 110C-FHN4T

Brand: Supermicro Pages: 108

TRAVELMATE 310 310

Brand: Viking Components Pages: 2

Brand: StarTech.com Pages: 8

Brand: Renkforce Pages: 4

Brand: Renkforce Pages: 8

Brand: Renkforce Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands