IBM System Storage TS2900 Manual Download | Manualshive

Page: 130 / 130

background image

X

XR

External register.

XRA

External register address register.

Related publications

This topic lists sources that provide additional information about the TS2900 Tape Autoloader.

Note: The TS2900 Tape Autoloader is a customer installed unit. The customer is responsible for the setup and maintenance of the tape autoloader. The customer is
charged for service if a service contract isn’t in place.

Related Publications

Refer to the following publications for information. To ensure that you have the current publications, go to

https://www.ibm.com/resources/publications

.

IBM® TS2900 Tape Autoloader Installation Quick Reference

(GA76-0423) provides installation information.

IBM TS2900 Tape Autoloader SCSI Reference

contains information about how to use and program the TS2900 Tape Autoloader with the Small Computer System

Interface (SCSI) interface.

IBM LTO Ultrium Tape Drive SCSI Reference

(GA32-0928) gives information about the supported SCSI commands and protocol that governs the behavior of the

SCSI interface for LTO drives. The SCSI reference also includes information about the TapeAlert flags that are supported.

IBM Tape Device Drivers and Diagnostic Tool User's Guide

provides instructions for attaching IBM-supported hardware to open-systems operating systems. It

indicates what devices and levels of operating systems are supported. It also gives requirements for adapters, and tells how to conﬁgure hosts to use the device
driver. All of the above are with the Ultrium family of devices.

IBM Tape Device Drivers Programming Reference

supplies information to application owners who want to integrate their open-systems applications with IBM-

supported Ultrium hardware. The reference contains information about the application programming interfaces (APIs) for each of the various supported operating-
system environments.

IBM Environmental Notices and User Guide (ENUG)

(z125-5823) includes statements on limitations, product information, product recycling and disposal, battery

information, flat panel display, refrigeration and water-cooling systems, external power supplies, and safety data sheets.

IBM Security Guardium Key Lifecycle Manager

contains information to help you install, conﬁgure, and use the IBM Security Guardium Key Lifecycle Manager.

IBM Safety Notices

(G229-9054) contains the safety notices for the TS2900 Tape Autoloader.

IBM Publications Center

is a worldwide central repository for IBM product publications and marketing material with a catalog of 70,000 items. Extensive search

facilities are provided. Payment options for orders are with credit card (in the US) or customer number for 20 countries. Many publications are available online in
various ﬁle formats, and they can all be downloaded by all countries, free of charge.

TS2900 Tape Autoloader

125

«
...
128
129
130

Summary of Contents for System Storage TS2900



































































































































Reviews:

No comments

Related manuals for System Storage TS2900

Brand: Campbell Pages: 32

Brand: Data General Pages: 58

Brand: Gardebruk Pages: 32

Brand: Quantum Pages: 78

Brand: IBM Pages: 2

Brand: Facom Pages: 2

Brand: National Instruments Pages: 20

Brand: Addonics Technologies Pages: 9

Brand: Seagate Pages: 42

Brand: Magnusson Pages: 18

Brand: Husky Pages: 4

BARRACUDA ST1000DM014

Brand: Seagate Pages: 29

StorageScaler 2460

Brand: DataDirect Networks Pages: 46

Brand: DataDirect Networks Pages: 106

Brand: QNAP Pages: 55

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands