Feature Code
Description
7010
Deskside Kit
8002
LTO Cleaning Cartridge
8111
Extra Cartridge Magazine
8905
Ultrium 9 Data Cartridges (5-pack)
8806
Ultrium 8 Data Cartridges (5-pack)
8706
Ultrium 7 Data Cartridges (5-pack)
9800-9847
Power cords
For the list of replacements parts, see
.
Installing
Installation Precautions
Do not expose the library to moisture.
Do not place the library on either the ends or sides as this action might cause damage.
To install and configure a tabletop or rack-mounted TS2900 Tape Autoloader, complete these procedures in the order they are presented.
Identifying library components
Use the packing slip that is included with your library to identify the library components.
Follow the directions for installing the deskside cover, if the library is used as a tabletop unit.
The TS2900 Tape Autoloader can be easily installed into a standard 19-inch rack system.
Removing the accessor locking screw
Steps to connect the Ethernet and SAS cables.
Steps to power on the library.
Initial configuration and customization
Labeling and loading tape cartridges
The procedure for loading the library with cartridges.
To verify the installation, follow the steps:
Procedure to verify the connection between the host computer and the library.
Registering for support notification
Support notification registration provides email notification when new firmware levels are updated and are available for download and installation.
Identifying library components
Use the packing slip that is included with your library to identify the library components.
The TS2900 model 3572 is not shipped with the rack mount kit (IBM FC: 7006) and/or power cord (IBM FC: 9800-9847) unless it is ordered.
1. Locate one or more packing slips.
2. Verify that you received each item that is listed on the packing slips.
You must provide SAS cabling with the correct configuration for your HBA. See
Note: Order the power cord that matches the electrical requirements of the country or area. See
.
Important: If any of the contents of your shipment are damaged or missing, call the appropriate number that is listed on the Quality Hotline card.
Installing on a tabletop
Follow the directions for installing the deskside cover, if the library is used as a tabletop unit.
A deskside cover and six desktop feet must be installed on the library chassis before the library can be used as a tabletop unit. If you intend to install the library in a rack,
skip this step and proceed to
.
lists the parts in the deskside assembly kit. A Phillips head screwdriver (preferably with a magnetic head) is needed to assemble the deskside kit.
Table 1. Deskside Assembly Kit
Number
Part Number
Quantity
Description
Part
1
45E3240
6
1U desktop foot
2
45E3798
1
Deskside cover
18
TS2900 Tape Autoloader
Summary of Contents for System Storage TS2900
Page 1: ...TS2900 Tape Autoloader IBM...