6
Serial connection
7
Ethernet port 2
8
Ethernet port 1
Figure 8 shows the type of connector that is located on the power supply assembly.
The connector enables you to connect the SAN Volume Controller 2145-8F4 to the
power source from the uninterruptible power supply.
SAN Volume Controller 2145-8F4 ports used during service
procedures
The SAN Volume Controller 2145-8F4 contains the keyboard service port and the
monitor service port. These ports are used only during service procedures. Figure 9
provides the locations of the service ports.
1
Keyboard port
2
Monitor port
SAN Volume Controller 2145-8F4 ports not used during normal
operation
The SAN Volume Controller 2145-8F4 is equipped with several ports that are not
used by the SAN Volume Controller during normal operation. Figure 10 on page
14 and Figure 11 on page 14 show the ports that are not used by the SAN Volume
Controller.
Ground
Live
Neutral
Figure 8. Power connector
svc00531
1
2
Figure 9. Service ports of the SAN Volume Controller 2145-8F4
Chapter 1. SAN Volume Controller overview
13
1
1
1
1
1
1
1
