IBM S822LC, Servicing

Page: 56 / 146

About this task
Attention:
For safety and airflow purposes, if you remove parts from the system, you must ensure that:
v PCIe tailstock fillers are present
v Graphic processor unit (GPU) or PCIe carriers are present and that either GPU or PCIe fillers are
installed in the carriers.
Procedure
1. If needed, label and remove the cables from the PCIe adapter. Also if needed, label and remove any
plugs that extend out of the PCIe adapter.
2. Ensure that you have the electrostatic discharge (ESD) wrist strap attached. If not, attach it now.
3. Using the blue strap and the blue touchpoint, remove the PCIe riser from the system. See Figure 40.
4. Place the PCIe riser on an ESD mat on the table.
5. Remove the PCIe adapter from the PCIe riser
Figure 40. Removing the PCIe riser
40
Servicing the IBM Power System S822LC (8335-GCA or 8335-GTA)