IBM S822LC, Servicing

Page: 57 / 146

6. Place the PCIe adapter on the table.
Replacing a PCIe adapter in a PCIe riser in the 8335-GCA or 8335-GTA
To replace a PCIe adapter in a PCIe riser, complete the steps in this procedure.
About this task
Attention: For safety and airflow purposes, if you remove parts from the system, you must ensure that:
v PCIe tailstock fillers are present
v Graphic processor unit (GPU) or PCIe carriers are present and that either GPU or PCIe fillers are
installed in the carriers.
Procedure
1. Ensure that you have the electrostatic discharge (ESD) wrist strap attached. If not, attach it now.
2.
Insert the replacement PCIe adapter into the PCIe riser, aligning it properly and inserting it fully into
the slot. See Figure 42 on page 42.
Figure 41. Removing PCIe card from PCIe riser
Removing and replacing parts
41