IBM RS/6000 7043 43P Series, User Manual, Page: 61 / 322

The System Management Services screen contains the following choices.
Config: Enables you to view your system setup.
Multi-Boot (Model 150 only): Enables you to set and view the
default operating system, modify the boot sequence, access the
Open Firmware command prompt, and other options.
Boot (Model 140 and Model 240): Allows you to modify the
boot sequence.
Utilities: Enables you to set and remove passwords, control
the playing of system tones, enable the unattended start mode,
set and view the addresses of your system's SCSI controllers,
select the active console, view or clear the firmware error log,
and update your system unit's firmware program.
Exit: Returns you to the previous screen.
To select an icon, move the cursor with the arrow keys to choose which icon is
highlighted, then press the Enter key. You can also select an icon by clicking on it
with your left mouse button. To leave the current screen, either press the Esc key or
select the Exit icon.
Chapter 3. System Management Services
3-3