IBM Remote Supervisor Adapter II, User Manual

Page: 115 / 132

Configuration - Networking & Security or Adapter Configuration - Advanced
(Firmware Update, Restart ASM, Restore Configuration) authority level.
The following table shows the arguments for the options.
Option Description Values
-t Timeout A timeout value in seconds, up to a
maximum of 4 294 967 295.
-status Status of TCP command mode on or off
Example
x345RSA> tcpcmdmode
-status on
-t 0
x345RSA>
timeouts command
Syntax
timeouts [ options ]
options:
-p POST_watchdog_option
-o OS_watchdog_option
-l loader_watchdog_option
-f power_off_delay_option
-n NMI_reset_delay_option
Description
Use the timeouts command to display the timeout values or change them. To
display the timeouts, type
timeouts
. To change timeout values, type the options
followed by the values. To change timeout values, you must have at least Adapter
Configuration authority.
The following table shows the arguments for the timeout values. These values
match the graduated scale pulldowns for server timeouts on the Web interface.
Option Timeout Units Values
-p POST timeout minutes disabled, 3.5, 4, 4.5, 5, 7.5, 10, 15,
20, 30, 60, 120
-o Operating system timeout minutes disabled, 2.5, 3, 3.5, 4
-l Loader timeout minutes disabled, 0.5, 1, 1.5, 2, 2.5, 3, 3.5, 4,
4.5, 5, 7.5, 10, 15, 20, 30, 60, 120
-f Power off delay minutes disabled, 0.5, 1, 2, 3, 4, 5, 7.5, 10, 15,
20, 30, 60, 120
-n NMI reset delay minutes disabled, 0.5, 1, 1.5, 2, 2.5, 3, 3.5, 4
Example
x345RSA> timeouts
-p 5
-o disabled
-l 3.5
-f 3
-n disabled
x345RSA> timeouts -o 2.5 -n 1
ok
Chapter 6. Command-line interface
107