IBM Redbooks ServeRAID-MR10M, User Manual

Page: 70 / 88

6-12 Using the Intelligent Battery Backup Unit
battery learn cycles, enable automatic learn cycles. To choose manual
battery learn cycles, disable automatic learn cycles.
If you enable automatic learn cyles, you can delay the start of the learn
cycles for up to 168 hours (7 days). If you disable automatic learn cycles,
you can start the learn cycles manually, and you can choose to receive
a reminder to start a manual learn cycle.
6.1.3.2 Setting Learn Cycle Properties
To set the learn cycle properties, perform the following steps:
1. Click the Physical tab to open the physical view.
2. Select the BBU icon in the left panel.
3. Click the Go To-> BBU-> Set Learn Cycle Properties.
The BBU operations screen appears.
4. On the BBU operations screen, click Enable automatic learn cycles
and click Go.
You can delay the start of the next learn cycle by up to 7 days (168
hours) using the Delay next learn cycle field.
5. To disable automatic learn cycles, click Disable automatic learn
cycles and then click Go.
You can start the learn cycles manually. In addition, you can check
the box next to the field Remind me when to start a learn cycle to
receive a reminder to start a manual learn cycle.
6.1.3.3 Starting a Learn Cycle Manually
To start the learn cycle properties manually, perform the following steps:
1. Click the Physical tab to open the physical view.
2. Select the BBU icon in the left panel.
3.
Click the
Go To-> BBU-> Start Learn Cycle
.
4. Click Start Learn Cycle and click Go.
Another way to start the learn cycle is to right-click the BBU icon and
select Start Learn Cycle from the menu.