![background image](http://html1.mh-extra.com/html/ibm/redbooks-serveraid-mr10m/redbooks-serveraid-mr10m_user-manual_3480551062.webp)
6-4
Using the Intelligent Battery Backup Unit
5. Click the word
Present
in the
Battery Backup
field.
The Battery Module screen appears, as shown in
. This
screen contains the following information:
–
Battery information
–
Design information
–
Capacity information
–
Auto Learn properties
Figure 6.3
Battery Module Screen
Most of the Battery Module properties are view-only and are self-
explanatory.
In the lower right corner of the screen are the Auto Learn options. A
learning cycle
is a battery calibration operation performed by the
controller periodically to determine the condition of the battery. You
can change the learn delay interval
(the length of time between
automatic learning cycles)
and the auto learn mode.
Note:
LSI recommends leaving the the learn delay interval and
the auto learn mode at their default settings.
Summary of Contents for Redbooks ServeRAID-MR10M
