IBM RackSwitch G8264CS, Installation Manual

Page: 32 / 70

2. Slide the switch into the rack.
1
2
3
3. Use M6 screws, washers, and clip nuts (or cage nuts) to secure the switch unit
to the rack. Torque the screws to approximately 3.5 newton-meters (30
inch-pounds).
Installing the RackSwitch G8264CS in an IBM iDataPlex rack
This section describes how to install the RackSwitch G8264CS in an IBM iDataPlex
rack. The iDataPlex mounting kit allows the switch to be mounted either vertically or
horizontally. For information about mounting the G8264CS in other rack types, see
the following sections:
v
“Installing the RackSwitch G8264CS in a standard equipment rack” on page 16
v
“Installing the RackSwitch G8264CS in an IBM System x rack” on page 22
The iDataPlex rack mount kit must be purchased separately.
The following table lists the parts included in the iDataPlex mounting kit.
Table 12. iDataPlex rack mount kit parts
Item number Description Quantity
1 Label 1
2 M6 locking washers 8
3 M6 screws 8
4 M6 clip nuts 8
18
IBM RackSwitch G8264CS: Installation Guide