![background image](http://html.mh-extra.com/html/ibm/rackswitch-g8264cs/rackswitch-g8264cs_installation-manual_609136036.webp)
Installing the RackSwitch G8264CS in an IBM System x rack
This section describes how to install the RackSwitch G8264CS in an IBM System
x
®
4-post rack, such as the IBM e1350. For information about mounting the
G8264CS in other rack types, see the following sections:
v
“Installing the RackSwitch G8264CS in a standard equipment rack” on page 16
v
“Installing the RackSwitch G8264CS in an IBM iDataPlex rack” on page 18
The System x mounting kit must be purchased separately.
The following table lists the parts included in the System x 4-post mounting kit.
Table 13. System x rack mount kit parts
Item number
Description
Quantity
1
Label
1
2
M6 locking washers
8
3
M3 screws
4
4
M6 screws
8
5
M6 clip nuts
8
6
M6 cage nuts
8
7
M4 screws
16
8
Filler plate
1
9
Switch front bracket
2
10
Rear mounting bracket
1
11
Rear mounting bracket with
cord exit
1
22
IBM RackSwitch G8264CS: Installation Guide
Summary of Contents for RackSwitch G8264CS
