![background image](http://html.mh-extra.com/html/ibm/rackswitch-g8264cs/rackswitch-g8264cs_installation-manual_609136042.webp)
RS G8264CS (config-ip-if)# ip address 10.10.10.2 (example IP address)
RS G8264CS (config-ip-if)# ip netmask 255.255.255.0
RS G8264CS (config-ip-if)# vlan 1
RS G8264CS (config-ip-if)# enable
RS G8264CS (config-ip-if)# exit
4. Configure the default gateway. Enable the gateway.
RS G8264CS (config)# ip gateway 1 address 10.10.10.1 (example gateway address)
RS G8264CS (config)# ip gateway 1 enable
After you configure the IP address for your switch and you have an existing
network connection, you can use the Telnet program from an external
management station to access and control the switch. The management station
and your switch must be on the same IP subnet.
The G8264CS supports a command-line interface (CLI) that you can use to
configure and control the switch over the network using the Telnet program. You
can use the CLI to perform many basic network management functions. In
addition, you can configure the switch for management by using an
SNMP-based network management system or a web browser.
For more information about using the CLI, see the
Command Reference
for the
RackSwitch G8264CS.
Using the Boot Management menu
The Boot Management menu enables you to switch the software image, reset the
switch to factory defaults, or to recover from a failed software download.
You can interrupt the boot process and enter the Boot Management menu from the
serial console port. When the system displays Memory Test, press Shift+B. The
Boot Management menu is displayed.
Resetting the System ...
Memory Test ................................
Boot Management Menu
1 - Change booting image
2 - Change configuration block
3 - Xmodem download
4 - Exit
Please choose your menu option: 1
Current boot image is 1. Enter image to boot: 1 or 2: 2
Booting from image 2
The Boot Management menu allows you to perform the following actions:
v
To change the boot image, press 1 and follow the screen prompts.
v
To change the configuration block, press 2, and follow the screen prompts.
v
To perform an Xmodem download, press 3 and follow the screen prompts.
v
To exit the Boot Management menu, press 4. The boot process continues.
28
IBM RackSwitch G8264CS: Installation Guide
Summary of Contents for RackSwitch G8264CS
