IBM RackSwitch G8264CS, Installation Manual

Page: 24 / 70

USB port
The USB port allows you to connect a USB drive to the switch. You can copy files
from the switch to the USB drive, or from the USB drive to the switch. You can also
start the switch using files on the USB drive.
For more information about using the USB drive, see the RackSwitch G8264CS
Release Notes .
Switch LEDs
Two LED stacks provide system status and port link status. The following illustration
shows the system LEDs.
The system LEDs are described in the following table.
Table 3. System LEDs
Symbol Description
M Stacking master LED
S Stacking member LED
Power supplies and power input status
! Service LED
The System LEDs are located on the front panel and are described in the following
table.
Table 4. System LED descriptions
Function Master Member Power supply Service
Total Power Failure Off Off Off Off
Service Required Flash green Flash green Flash green Flash blue
Power Supplies OK Not applicable Not applicable Steady green Not applicable
Power Supply Failure Not applicable Not applicable Flash green Not applicable
Fans OK Not applicable Not applicable Not applicable Not applicable
Fan Failure Not applicable Not applicable Not applicable Not applicable
Stack Master On Off Not applicable Off
Stack
Backup/Member Off On Not applicable On
Stack Error On On Not applicable On
Non-Stack Member Off Off Not applicable Off
RJ-45 LEDs
Status LEDs for the RJ-45 ports are located on the front panel and are described in
the following table.
Figure 5. System status LEDs
10
IBM RackSwitch G8264CS: Installation Guide