IBM RackSwitch G8000, Application Manual

Page: 160 / 362

158
RackSwitch G8000: Application Guide
The Update Image/Cfg section of the window applies to the Master. When a new
software image or configuration file is loaded, the file first loads onto the Master, and
the Master pushes the file to all other switches in the stack, placing it in the same
software or configuration bank as that on the Master. For example, if the new image
is loaded into image 1 on the Master switch, the Master will push the same firmware
to image 1 on each Member switch.
Reboot Master Performs a software reboot/reset of the Master switch. The
software image specified in the Image To Boot drop-down list
becomes the active image.
Reboot Switches Performs a reboot/reset on selected switches in the stack.
Select one or more switches in the drop-down list, and click
Reboot Switches. The software image specified in the Image To
Boot drop-down list becomes the active image.
Table 15. Stacking Boot Management buttons (continued)
Field Description