manualshive.com logo in svg

IBM RackSwitch G8000, Application Manual

The IBM RackSwitch G8000 is a high-performance, reliable networking switch designed for data centers and enterprises. Easily configure and manage your network with the comprehensive user manual available for free download at manualshive.com. Get detailed instructions and optimize your network operations with this essential manual.

Share
Download
background image

12     

RackSwitch G8000: Application Guide

Chapter 22. OSPF.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 257

OSPFv2 Overview .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 257

Types of OSPF Areas .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 257
Types of OSPF Routing Devices.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 258
Neighbors and Adjacencies.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 259
The Link-State Database.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 259
The Shortest Path First Tree   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 260
Internal Versus External Routing.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 260

OSPFv2 Implementation in IBM N/OS  .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 261

Configurable Parameters    .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 261
Defining Areas.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 262

Assigning the Area Index  .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 262
Using the Area ID to Assign the OSPF Area Number  .   .   .   .   .   .   . 263
Attaching an Area to a Network    .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 263

Interface Cost  .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 264
Electing the Designated Router and Backup  .   .   .   .   .   .   .   .   .   .   .   . 264
Summarizing Routes   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 264
Default Routes.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 265
Virtual Links.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 266
Router ID .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 266
Authentication .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 267

Configuring Plain Text OSPF Passwords .   .   .   .   .   .   .   .   .   .   .   . 267
Configuring MD5 Authentication   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 268

Host Routes for Load Balancing .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 269
Loopback Interfaces in OSPF .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 269
OSPF Features Not Supported in This Release .   .   .   .   .   .   .   .   .   .   . 270

OSPFv2 Configuration Examples  .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 270

Example 1: Simple OSPF Domain  .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 271
Example 2: Virtual Links .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 273
Example 3: Summarizing Routes    .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 277
Verifying OSPF Configuration .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 278

OSPFv3 Implementation in IBM N/OS  .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 279

OSPFv3 Differences from OSPFv2.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 279

OSPFv3 Requires IPv6 Interfaces    .   .   .   .   .   .   .   .   .   .   .   .   .   . 279
OSPFv3 Uses Independent Command Paths  .   .   .   .   .   .   .   .   .   . 279
OSPFv3 Identifies Neighbors by Router ID  .   .   .   .   .   .   .   .   .   .   . 280
Other Internal Improvements    .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 280

OSPFv3 Limitations.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 280
OSPFv3 Configuration Example .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 280

Part 6: High Availability Fundamentals .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 283

Chapter 23. Basic Redundancy  .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 285

Trunking for Link Redundancy   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 285
Virtual Link Aggregation.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 285
Hot Links    .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 286

Forward Delay .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 286
Preemption  .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 286
FDB Update.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 286
Configuration Guidelines .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 286
Configuring Hot Links  .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 287

Summary of Contents for RackSwitch G8000











































































































































































































































































































































































Reviews:

No comments

Related manuals for RackSwitch G8000

Q-See QC814 Specifications preview
QC814
Brand: Q-See Pages: 2
TP-Link tl-wr845n Quick Installation Manual preview
tl-wr845n
Brand: TP-Link Pages: 2
Parker PCH1 T P Series User Manual preview
PCH1 T P Series
Brand: Parker Pages: 107
UfiSpace S9600-28DX Hardware Installation Manual preview
S9600-28DX
Brand: UfiSpace Pages: 34
Acorn Computers Limited A300 Series Quick Start Manual preview
A300 Series
Brand: Acorn Computers Limited Pages: 2
RadioSPECTRAL ICOM IC-7300 Installation Manual preview
ICOM IC-7300
Brand: RadioSPECTRAL Pages: 2
Devolo dLAN 200 AVsmart+ Technical Data preview
dLAN 200 AVsmart+
Brand: Devolo Pages: 2
Hameg HM6050-2K Manual preview
HM6050-2K
Brand: Hameg Pages: 46
mikroElektronika mikroETH 100 Manual preview
mikroETH 100
Brand: mikroElektronika Pages: 6
Hirschmann MM2-2FXM3/2TX1 Description And Operating Instructions preview
MM2-2FXM3/2TX1
Brand: Hirschmann Pages: 8
Dahua Technology VDA-NVR2108W4KS2 User Manual preview
VDA-NVR2108W4KS2
Brand: Dahua Technology Pages: 363
Orcomm DILX-GW Operation Manual preview
DILX-GW
Brand: Orcomm Pages: 10
MikroTik wAP series User Manual preview
wAP series
Brand: MikroTik Pages: 5
WAVESYS WSIL-1204-GT2-SFP2 Hardware User Manual preview
WSIL-1204-GT2-SFP2
Brand: WAVESYS Pages: 21
Billion BiPAC 7402 Specifications preview
BiPAC 7402
Brand: Billion Pages: 2
Cambium Networks PMP 450 AP Installation Manual preview
PMP 450 AP
Brand: Cambium Networks Pages: 292
Cisco Internet Router Cisco 12404 Installation And Configuration Manual preview
Internet Router Cisco 12404
Brand: Cisco Pages: 292
Crestron DM-TX-200-C-2G Operations & Installation Manual preview
DM-TX-200-C-2G
Brand: Crestron Pages: 36

Brands by name

Popular brands

Load more brands