5137ch03.fm
Draft Document for Review October 14, 2014 10:19 am
144
IBM Power Systems E870 and E880 Technical Overview and Introduction
The capability is only displayed if the managed system supports it.
To activate a partition on a supported system to support Dynamic Partition Remote Restart,
enter the following command:
chsyscfg -r lpar -m <ManagedSystemName> -i
"name=<PartitionName>,remote_restart_capable=1"
To use the Remote Restart feature the following conditions need to be met:
The managed system should support
toggle partition remote capability
The partition should be in the inactive state
The partition type should be AIX, IBM i, or Linux
The reserved storage device pool exists
The partition should not own any of the below resources/settings
– BSR
– Time Reference Partition
– Service Partition
– Opticonnect
– HSL
– Physical I/O
– HEA
– Error Reporting Partition
– Is part of EWLM
– Huge Page Allocation
– Owns Virtual Serial Adapters
– Belongs to I/O Fail Over Pool
– SR-IOV non-adjunct
For further information including the use of Partition Remote Restart please see the following:
http://www.ibm.com/support/knowledgecenter/POWER8/p8hat/p8hat_enadisremres.htm
