IBM Power System 8335-GCA Manual Download Page 44

Page: 44 / 174

To list SELs by using an in-band network, use the following command:

ipmitool sel elist

To list SELs remotely over the LAN, use the following command:

ipmitool -I lanplus -U <username> -P <password> -H <BMC IP addres or BMC hostname> sel elist

Scan the SELs for an event with the value

OEM record de

. Did you find a SEL with the value

OEM

record de

Then

Yes:

Continue with the next step.

Go to step 4 on page 29.

The OEM record de specific log information is indicated by the rightmost digits of the SEL with the
value

OEM record de

. Use Table 17 to determine the service action to perform.

Table 17. OEM record de specific log information and service action

OEM record de specific log information

Service action

00xxxxxxxxxx

Go to Getting fixes and update the system firmware to
the most recent level of firmware that is available. If this
SEL event continues to be logged, go to “Collecting
diagnostic data” on page 109. Then, go to “Contacting
IBM service and support” on page 110.

01xxxxxxxxxx

Go to the “EPUB_PRC_FIND_DECONFIGURE_PART
isolation procedure” on page 96.

04xxxxxxxxxx

Go to the “EPUB_PRC_SP_CODE isolation procedure”
on page 97.

05xxxxxxxxxx

Go to the “EPUB_PRC_PHYP_CODE isolation
procedure” on page 97.

08xxxxxxxxxx

Go to the “EPUB_PRC_ALL_PROCS isolation procedure”
on page 98.

09xxxxxxxxxx

Go to the “EPUB_PRC_ALL_MEMCRDS isolation
procedure” on page 98.

0Axxxxxxxxxx

10xxxxxxxxxx

Go to the “EPUB_PRC_LVL_SUPPORT isolation
procedure” on page 99.

16xxxxxxxxxx

1Cxxxxxxxxxx

22xxxxxxxxxx

Go to the “EPUB_PRC_MEMORY_PLUGGING_ERROR
isolation procedure” on page 100.

2Dxxxxxxxxxx

Go to the “EPUB_PRC_FSI_PATH isolation procedure”
on page 100.

Problem analysis, system parts, and locations for the 8335-GCA, 8335-GTA, 8335-GTB, and 8348-21C

Summary of Contents for Power System 8335-GCA















































































































































































Search results

Summary of Contents for Power System 8335-GCA

Reviews:

Brands by name

Popular brands

IBM Power System 8335-GCA, Manual

Search results

Summary of Contents for Power System 8335-GCA

Reviews:

Brands by name

Popular brands