IBM Power System 5802, Instruction Manual

Page: 50 / 64

Model 9117-MMC or 9179-MHC connector locations
Learn about connector locations.
Model 9117-MMD or 9179-MHD connector locations
Learn about connector locations.
The 9117-MMD and 9179-MHD servers provide cable connector locations for the following enclosures:
v
Support for expansion units, as shown in the following figure, is as follows:
– The card installed in the C2 slot can contain two 12X double data rate (DDR) cable ports. However,
the C2 slot cannot provide both 12X DDR and PCIe cable ports.
– The card installed in the C3 slot can contain two 12X DDR cable ports. However, the C3 slot cannot
provide both 12X DDR and PCIe cable ports.
v
Support for disk drive enclosures, as shown in the following figure, is as follows:
– The server contains a SAS port.
v Support for PCIe storage enclosures, as shown in the following figure, is as follows:
– The card installed in the C2 slot can contain two PCIe cable ports. However, the C2 slot cannot
provide both PCIe and 12X DDR cable ports.
– The card installed in the C3 slot can contain two PCIe cable ports. However, the C3 slot cannot
provide both PCIe and 12X DDR cable ports.
Figure 42. Model 9117-MMC or 9179-MHC connector locations
38
Power Systems: Installing the 5802 and 5877 expansion units