manualshive.com logo in svg

IBM Power 770, Technical Overview And Introduction

The IBM Power 770 is a high-performance server designed for enterprise-level computing. Our comprehensive "Technical Overview and Introduction" manual provides detailed insights into its advanced features and functionalities. Download this invaluable resource for free from manualshive.com to unlock the full potential of your IBM Power 770 server.

Share
Download
background image

114

 

IBM Power 770 and 780 (9117-MMD, 9179-MHD) Technical Overview and Introduction

For information about SUSE Linux Enterprise Server, go to:

http://www.novell.com/products/server

For information about Red Hat Enterprise Linux Advanced Server, go to:

http://www.redhat.com/rhel/features

2.13.5  Java versions that are supported

There are unique considerations when running Java 1.4.2 on POWER7 or  
servers. For best use of the performance capabilities and most recent improvements of 
POWER7 technology, upgrade Java-based applications to Java 7, Java 6, or Java 5 when 
possible. For more information, visit:

http://www.ibm.com/developerworks/java/jdk/aix/service.html

2.13.6  Boosting performance and productivity with IBM compilers

IBM XL C, XL C/C++, and XL Fortran compilers for AIX and for Linux use the latest 
processor architecture. Release after release, these compilers continue to help 
improve application performance and capability, exploiting architectural enhancements that 
are made available through the advancement of the POWER technology.

IBM compilers are designed to optimize and tune your applications for execution on IBM 
POWER platforms, to help you unleash the full power of your IT investment, to create and 
maintain critical business and scientific applications, to maximize application performance, 
and to improve developer productivity. 

The performance gain from years of compiler optimization experience is seen in the 
continuous release-to-release compiler improvements that support the POWER4 processors, 
through to , POWER5, , POWER6, and POWER7 processors, and now 
including the processors. With the support of the latest  processor 
chip, IBM advances a more than a 20-year investment in the XL compilers for POWER series 
and IBM PowerPC® series architectures.

XL C, XL C/C++, and XL Fortran features that are introduced to use the latest  
processor include the following items:

򐂰

Vector unit and vector scalar extension (VSX) instruction set to efficiently manipulate 
vector operations in your application

򐂰

Vector functions within the Mathematical Acceleration Subsystem (MASS) libraries for 
improved application performance

򐂰

Built-in functions or intrinsics and directives for direct control of POWER instructions at the 
application level

򐂰

Architecture and tune compiler options to optimize and tune your applications

COBOL for AIX enables you to selectively target code generation of your programs to 
either exploit  systems architecture or to be balanced among all supported 
POWER systems. The performance of COBOL for AIX applications is improved by means 
of an enhanced back-end optimizer. With the back-end optimizer, a component common also 
to the IBM XL compilers, your applications can use the most recent industry-leading 
optimization technology.

The performance of PL/I for AIX applications is improved through both front-end changes and 
back-end optimizer enhancements. With the back-end optimizer, a component common also 

Summary of Contents for Power 770





























































































































































































































Reviews:

No comments

Related manuals for Power 770

Campbell Hausfeld DG350000CK Operating Instructions And Parts Manual preview
DG350000CK
Brand: Campbell Hausfeld Pages: 8
Ganz GH Series Instruction Manual preview
GH Series
Brand: Ganz Pages: 8
Greencut 1010016 Instruction Manual preview
1010016
Brand: Greencut Pages: 20
Stanley 73200 Instruction And Service Manual preview
73200
Brand: Stanley Pages: 128
Altronix ALTV129-DC Installation Instructions preview
ALTV129-DC
Brand: Altronix Pages: 2
Delta DRP024V480W1AA Technical Data Sheet preview
DRP024V480W1AA
Brand: Delta Pages: 15
OEM Tools 24495 Operating Instructions And Parts Manual preview
24495
Brand: OEM Tools Pages: 8
Napa 6-1012 Instruction Manual preview
6-1012
Brand: Napa Pages: 12
Gude 02823 Translation Of The Original Instructions preview
02823
Brand: Gude Pages: 44
Gallagher G34630 Instructions Manual preview
G34630
Brand: Gallagher Pages: 84
SATA 98103 User Manual preview
98103
Brand: SATA Pages: 28
NewMar PM-12-40A PM Series Installation And Operation Manual preview
PM-12-40A PM Series
Brand: NewMar Pages: 8
Ingersoll-Rand ELB2612N Product Information preview
ELB2612N
Brand: Ingersoll-Rand Pages: 16
Yokota YX-180SB Manual preview
YX-180SB
Brand: Yokota Pages: 42
Fein ASM 12-9 Brochure & Specs preview
ASM 12-9
Brand: Fein Pages: 16
Kaindl WIG 4 Operating Instructions Manual preview
WIG 4
Brand: Kaindl Pages: 10
Sealey POWER TOOLS SNA9821 Instructions preview
POWER TOOLS SNA9821
Brand: Sealey Pages: 2
Parker P1Z Series Operating Instructions Manual preview
P1Z Series
Brand: Parker Pages: 12

Brands by name

Popular brands

Load more brands