manualshive.com logo in svg

IBM Power 770, Technical Overview And Introduction

The IBM Power 770 is a high-performance server designed for enterprise-level computing. Our comprehensive "Technical Overview and Introduction" manual provides detailed insights into its advanced features and functionalities. Download this invaluable resource for free from manualshive.com to unlock the full potential of your IBM Power 770 server.

Share
Download
background image

Chapter 3. Virtualization 

125

3.2  POWER processor modes

Although, strictly speaking, not a virtualization feature, the POWER modes are described 
here because they affect various virtualization features.

On Power System servers, partitions can be configured to run in several modes, including the 
following modes:

򐂰

POWER6 compatibility mode

This execution mode is compatible with Version 2.05 of the Power Instruction Set 
Architecture (ISA). For more information, visit the following address:

http://power.org/wp-content/uploads/2012/07/PowerISA_V2.05.pdf

򐂰

compatibility mode

This mode is similar to POWER6, with eight additional Storage Protection Keys.

򐂰

POWER7 mode

This is the native mode for  and POWER7 processors, implementing the v2.06 
of the Power Instruction Set Architecture. For more information, visit the following address:

http://power.org/wp-content/uploads/2012/07/PowerISA_V2.06B_V2_PUBLIC.pdf

Summary of Contents for Power 770





























































































































































































































Reviews:

No comments

Related manuals for Power 770

IBIX 25 Use And Maintenance Manual preview
25
Brand: IBIX Pages: 58
K&M 28672 Quick Start Manual preview
28672
Brand: K&M Pages: 4
Thomas & Betts COMFORT CRIMP TBM21E Instructions For Use preview
COMFORT CRIMP TBM21E
Brand: Thomas & Betts Pages: 2
Malibu Boats ML200RT Instructions preview
ML200RT
Brand: Malibu Boats Pages: 2
Hakko Electronics FV-310 Instruction Manual preview
FV-310
Brand: Hakko Electronics Pages: 2
KEPCO HSF 24-50A Operator'S Manual preview
HSF 24-50A
Brand: KEPCO Pages: 12
LEAB LPS 1212 User Manual preview
LPS 1212
Brand: LEAB Pages: 28
P.I.T. GSH25-C1 Operation Manual preview
GSH25-C1
Brand: P.I.T. Pages: 20
Famsun Muyang SZLH Series Concise Manual preview
Muyang SZLH Series
Brand: Famsun Pages: 46
Mean Well ELG-150-C Series Manual preview
ELG-150-C Series
Brand: Mean Well Pages: 12
Caswell SPC-9250 User Manual preview
SPC-9250
Brand: Caswell Pages: 2
EKSMA OPTICS PS-40 Technical Description preview
PS-40
Brand: EKSMA OPTICS Pages: 13
Ring Powering RINV500 PowerSource User Manual preview
RINV500 PowerSource
Brand: Ring Powering Pages: 2
Makita 4331DWD Instruction Manual preview
4331DWD
Brand: Makita Pages: 22
Black & Decker JS500 Instruction Manual preview
JS500
Brand: Black & Decker Pages: 8
Black & Decker JS515 Instruction Manual preview
JS515
Brand: Black & Decker Pages: 7
Soraton SA 344027 Instructions For Use Manual preview
344027
Brand: Soraton SA Pages: 109
Storch 21 28 35 Original Instruction preview
21 28 35
Brand: Storch Pages: 52

Brands by name

Popular brands

Load more brands