Installing Adapters
2. Press the raised area in the middle of the bracket; then, press
the bracket toward the rear of the server and lift out. You
might need a screwdriver to release the bracket from the server.
3. Reposition the card guides on the adapter support bracket:
a. Lift the tabs on the top of the top card guide to release it
from the bracket.
b. Align the card guide tabs with the slots closest to the front
of the bracket. The card guide will extend beyond the
bracket.
c. Hook the tabs on the bottom edge of the card guide on the
flange on the back of the bracket; then press the card guide
forward until it snaps into place.
4. Holding the bracket at an angle, insert the tabs on the back of
the card guide into the slots closer to the front of the server.
5. Press the bracket to the right until it snaps into place.
Chapter 6. Installing Options
205
Summary of Contents for PC Server 520
