![background image](http://html1.mh-extra.com/html/ibm/nortel-networks-l2-3/nortel-networks-l2-3_manual_3481374146.webp)
132
Nortel Networks L2/3 Ethernet Switch Module for IBM
Eserver
BladeCenter
* 10.20.0.0 255.255.255.0 10.20.0.243 direct fixed 20
* 10.20.0.243 255.255.255.255 10.20.0.243 local addr 20
* 10.20.0.255 255.255.255.255 10.20.0.255 broadcast broadcast 20
* 10.35.0.0 255.255.255.0 10.35.0.243 direct fixed 35
* 10.35.0.243 255.255.255.255 10.35.0.243 local addr 35
* 10.35.0.255 255.255.255.255 10.35.0.255 broadcast broadcast 35
* 10.36.0.0 255.255.255.0 10.36.0.243 direct fixed 36
* 10.36.0.243 255.255.255.255 10.36.0.243 local addr 36
* 10.36.0.255 255.255.255.255 10.36.0.255 broadcast broadcast 36
* 10.45.0.0 255.255.255.0 10.10.0.244 indirect rip 2 10
* 10.46.0.0 255.255.255.0 10.10.0.244 indirect rip 2 10
* 10.99.0.0 255.255.255.0 10.36.0.246 indirect rip 2 36
* 127.0.0.0 255.0.0.0 0.0.0.0 martian martian
* 255.255.255.255 255.255.255.255 255.255.255.255 broadcast broadcast
>> GbESM_1 - IP Routing# /i/l3/rip
------------------------------------------------------------
[RIP Information Menu]
routes - Show RIP routes
dump - Show RIP user's configuration
>> GbESM_1 - RIP Information# routes
10.10.0.0/24 via 10.20.0.244 metric 2
10.20.0.0/24 via 10.10.0.244 metric 2
10.35.0.0/24 via 10.20.0.244 metric 3
10.36.0.0/24 via 10.20.0.244 metric 3
10.45.0.0/24 via 10.10.0.244 metric 2
10.46.0.0/24 via 10.10.0.244 metric 2
10.99.0.0/24 via 10.36.0.246 metric 2
>> GbESM_1 - RIP Information# dump
Enter interface number: (1-128) or 0 to show all 10
RIP USER CONFIGURATION :
RIP on updat 30
RIP Interface 10 : 10.10.0.243, enabled
version 2, listen enabled, supply enabled, default listen
poison disabled, trigg enabled, mcast enabled, metric 1
auth none,key none
Cisco commands to verify RIP
The
sh ip route
command is the CIsco equivalent of the dump command shown above. RIP
routes are marked by the letter
R
in the left hand column. Most OSPF commands are marked
by the letter
O
. The
show ip protocol
command (shown in Example 7-37) provides detailed
information about the operation of RIP when it is running (and also on OSPF when it is
running).
Example 7-37 Cisco commands to verify RIP
sh ip prot
*** IP Routing is NSF aware ***
Routing Protocol is "rip"
Sending updates every 30 seconds, next due in 19 seconds
Invalid after 180 seconds, hold down 180, flushed after 240
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Redistributing: rip
Default version control: send version 2, receive version 2
Summary of Contents for Nortel Networks L2/3
