IBM Nortel Networks L2/3, Manual

Page: 53 / 190

Chapter 5. Nortel Networks L2/3 GbESM management and administration
39
name "VLAN_Red"
def INT1 INT2 EXT1 EXT2
/c/l2/vlan 99
ena
name "MGMT"
def INT4 EXT1 EXT2
/c/l2/stg 1/clear
/c/l2/stg 1/add 1 10 20 99
/c/l2/lacp/port EXT1
mode active
/c/l2/lacp/port EXT2
mode active
adminkey 17
/c/l3/if 99
ena
addr 10.99.0.243
mask 255.255.255.0
broad 10.99.0.255
vlan 99
/c/l3/gw 1
ena
addr 10.99.0.245
/c/l3/gw 2
ena
addr 10.99.0.246
/
script end /**** DO NOT EDIT THIS LINE!
Configuring user accounts
This section describes the user accounts on the switch. There are multiple modes of
authentication which are supported on the Nortel Networks L2/3 GbESM:
򐂰 The default mode is to support passwords without individual user IDs. When accessing
the CLI in this mode, there is only a single prompt to enter the password. Table 5-1 lists
the three passwords that are supported.
Table 5-1 Description of default user accounts
User account Description/Tasks performed Default Password
User Can view switch statistics but cannot make changes. user
Operator The Operator account manages all functions of the
switch but cannot make permanent changes to the
switch configuration. oper
Administrator Administrator is the super-user account and has
complete access to all menus, information, and
configuration commands on the switch. admin