Chapter 7. Nortel Networks L2/3 GbESM configuration and network integration
97
Full configuration snapshots
Example 7-15 shows the output of
/c/dump
for the GbESM_1 while Example 7-16 on page 98
shows the output of
show running-conf
from the Core1 Cisco3560 Switch. See the
differences to the configurations of GbESM_2 and Core2 as comments in the relevant lines
respectively.
The configurations are valid for copper and fiber infrastructure, it makes no difference to the
GbESM. For the uplink switches the difference is, that for fiber connections the GBIC ports
G0/25 and G0/26 have been used as IEEE 802.1Q tagged ports (not aggregated) and G0/27
as interconnection of the Cisco Switches.
Example 7-15 Advanced Layer 2 Topology with STP turned off for the GbESMs
/* Version 1.0.1.6, Base MAC address 00:11:f9:36:b7:00
/* GbESM_1
/c/sys
hprompt ena
/c/sys/access/user/uid 1
name "USERID"
pswd "5754473e1340022a1e37a6f7d0f0a1d8aa8b437633b51ae68eb6d669ce9fd9f7"
ena
cos admin
/c/sys/ssnmp
name "GbESM_1"
/*
name "GbESM_2" on GbESM_2
/c/port INT1
pvid 20
/c/port INT3
pvid 10
/*
pvid 20 on GbESM_2
/c/port INT4
pvid 99
/c/port EXT1
tag ena
pvid 5
/c/port EXT2
tag ena
pvid 5
/c/port EXT5
tag ena
pvid 5
/c/port EXT6
tag ena
pvid 5
/c/l2/vlan 1
def INT1 INT2 INT3 INT4 INT5 INT6 INT7 INT8 INT9 INT10 INT11 INT12 INT13 INT14 EXT3 EXT4
/c/l2/vlan 5
ena
name "Native"
def EXT1 EXT2 EXT5 EXT6
/c/l2/vlan 10
ena
Important: When looking at the configuration commands presented, commands toward
the left margin are for Core1 or GbESM_1 switches. Where the GbESM_2 or Core2 switch
configurations differ, the commands presented within comment syntax (
/*
for GbESM,
!
for Cisco,
#
for Extreme) are for the counterpart switch of the same type, GbESM_2 or
Core2.
Summary of Contents for Nortel Networks L2/3
