IBM NetVista 6266, User Manual

Page: 82 / 144

6-14 IBM Personal Computer User Guide
Removing the hard disk drive for type 6266
To replace or remove the hard disk drive, follow these steps:
1. Follow the above steps to remove the CD-ROM.
2. Make sure to disconnect the power cord and signal cables from the hard disk
drive and the diskette drive.
3. Remove the screw that secures the mounting tray holding the hard disk drive
4. Push the mounting tray to the right to separate it from the chassis, then lift the
tray out of chassis.
5. To remove the hard disk drive from the mounting tray, remove the four
screws securing it to the tray.