manualshive.com logo in svg

IBM NetVista 6266, User Manual

Share
Download
IBM NetVista 6266 User Manual Download Page 72

6-4

IBM Personal Computer User Guide

Adding and removing adapter cards for type 6266

The system board includes three PCI adapter card connectors (only the low-profile 
PCI cards will fit). 

Installing adapter cards

Your computer provides expansion slots for PCI adapter cards only.

Follow these steps to install an adapter card:

1. Align and insert the adapter card into the adapter card connector.

2. Secure the card with the screw to the system chasis

3. If your card has cables, connect the cable or cables from the adapter card to 

the correct connection on the system board or CD-ROM drive.

4. Reinstall all hardware that you removed prior to the installation of the adapter 

card.

If you disconnected any cables to gain access to the adapter card connector on the 
system board, reconnect the cables.

Note:

Make sure that you have followed the proper 
procedure in “Opening the system unit” on page 5-5. 
This ensures that you discharge the static electricity 
that you may have accumulated.

Summary of Contents for NetVista 6266

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands