IBM NetVista 6266, User Manual

Page: 91 / 144

Adding and replacing system board components 7-7
Replacing the system battery
Follow these steps to replace the battery:
1. Note the orientation of the battery in the bracket.
2. Press outward on the mental latch and lift the battery out.
3. Insert a new 3V lithium battery (CR2032) into the bracket and press it down
until the securing clip clicks and locks the battery in if you replace the system
battery, you need to reset the system date and time in Setup.I
Note:
Before replacing the lithium battery review the
lithium battery notice on “Lithium battery
notice” on page xi.
Important:
Make sure you insert the battery with the
positive side on top. A plus (+) sign indicates
the positive side.