manualshive.com logo in svg

IBM NetVista 6266, User Manual

Share
Download
IBM NetVista 6266 User Manual Download Page 96

8-2

 IBM Personal Computer User Guide

Before you panic: some simple fixes

Step 1

Are the power indicator lights on the system unit and monitor lit?

Power is reaching the system unit and monitor. Go to Step 2.

a. Press the power button on the system unit and monitor to make sure 

they are turned on.

b. Make sure your system unit and monitor cables are correctly and 

securely connected. Make sure the system unit and monitor power 
cords are plugged into electrical outlets.

c. Make sure the electrical outlets you are using are not controlled by a 

wall or dimmer switch.

d. If you are using a multiple outlet device (for example, a power surge 

protector or power strip), make sure it is plugged in and turned on.

If the problem continues, refer to the “Quick problem solving chart” on page 
8-6.

Yes

No

Summary of Contents for NetVista 6266

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands