IBM IntelliStation Z Pro 6221, Hardware Maintenance Manual

Page: 39 / 168

Error code (hex) Description
0x02 Explanation: Bad node address (multicast address).
Action: Make sure the locally administered address is valid, if one is specified. The address
cannot be a multicast address.
0x03 Explanation: Failed self-test.
Action: Make sure a cable is attached to the Ethernet connector.
0x0D Explanation: Could not allocate enough memory for transmit queues.
For Windows NT:
®
Action:
1. From the Windows NT desktop, click Start
→
Control Panel
→
Networks
→
Adapters .
2. Select an IBM Ethernet adapter from the list.
3. Click Properties
→
Advanced .
4. Lower the resource values that apply to the transmit queue.
For Windows 2000:
Action:
1. From the Windows 2000 desktop, click Start
→
Settings
→
Control Panel
→
Network and
Dial-up Connections .
2. Right-click an IBM Ethernet adapter in the list and click Properties .
3. Select a component and click Configure .
4. Click the Advanced tab and lower the resource values that apply to the transmit queue.
0x0E Explanation: Could not allocate enough memory for receive queue.
For Windows NT:
Action:
1. From the Windows NT desktop, click Start
→
Control Panel
→
Networks
→
Adapters .
2. Select an IBM Ethernet adapter from the list.
3. Click Properties
→
Advanced .
4. Lower the value for the resource named in the message.
For Windows 2000:
Action:
1. From the Windows 2000 desktop, click Start → Settings → Control Panel → Network and
Dial-up Connections .
2. Right-click an IBM Ethernet adapter in the list and click Properties .
3. Select a component and click Configure .
4. Click the Advanced tab and lower the value for the resource named in the message.
Diagnostics
29