Using the Device Driver and IBM Enhanced Diagnostics CD
Be certain your computer will start up with the CD-ROM drive as the 1st Boot
Device. If not, use the BIOS Setup Utility to change your 1st Boot Device. For
information on how to use the BIOS Setup Utility, see Access IBM on your
desktop, or refer to “Using the BIOS Setup Utility program” on page 23. Do the
following to run Device Driver and IBM Enhanced Diagnostics CD:
1.
Turn off your computer and any attached devices.
2.
Insert the Device Drivers and Enhanced Diagnostics CD into the CD-ROM drive.
3.
Turn on all attached devices; then, turn on your computer.
4.
Follow the instructions on the screen.
5.
When you finish running the IBM Enhanced Diagnostics and Utilities program,
exit the program and remove the CD from the drive.
6.
If you used the BIOS Setup Utility to change the 1st Boot Device, restore it to
the original setting.
Creating an IBM Enhanced Diagnostics diskette
You can create an IBM Enhanced Diagnostics diskette one of two ways:
v
download a program image from the World Wide Web
v
create a diskette from the Product Recovery Program
To create a startable Enhanced Diagnostics diskette from the World Wide Web:
1.
Go to the following World Wide Web site: http://www.ibm.com/pc/support/
2.
Download the diagnostics file for your computer to a hard disk drive directory
(not to a diskette).
3.
Go to a DOS prompt and change to the directory where the file was
downloaded.
4.
Insert a blank high-density diskette in diskette drive A.
5.
Type in the following, and then press Enter: filename a: where filename is the
name of the file you downloaded from the Web.
The downloaded Web file is self-extracting and will be copied to the diskette.
When the copy completes, store the diskette in a safe place.
To create an IBM Enhanced Diagnostics diskette from The Product Recovery
Program:
1.
Shut down
the operating system and Restart the computer.
2.
When the prompt,
To start the Product Recovery Program, press F11
appears, press F11 quickly.
3.
From the main menu, select System Utilities.
4.
Select Create a diagnostic diskette.
Using the Enhanced diagnostics diskette
Do the following to start the IBM Enhanced Diagnostics diskette:
1.
Turn off any attached devices and your computer.
2.
Insert the IBM Enhanced Diagnostics diskette into the diskette drive.
3.
Turn on all attached devices; then, turn on your computer.
4.
Follow the instructions on the screen.
When the tests have completed, you can view the Test Log by selecting Utility
from the top of the screen.
54
IntelliStation M Pro: User Guide
Summary of Contents for IntelliStation M Pro
