IBM FlashSystem 840, Installation Manual

Page: 33 / 78

3. Remove the springs that are taped to one of the rails.
4.
Attach a spring to the outside of each rail.
a. Attach the circle end of the spring around the stud on the rail (see
Figure 2).
b. Pulling on the spring, attach the hook end of the spring to the tab on the
rail.
5. At the front of the rack cabinet, identify the two standard rack units (2U) of
space in the rack into which you want to install the support rails. Figure 3 on
page 12 shows two rack units with the front mounting holes identified.
v3500067
Figure 2. Installing the rail spring
Chapter 2. Installing the hardware
11