IBM DDRS-39130 - Ultrastar 9.1 GB Hard Drive, Specifications

Page: 27 / 228

4.0 Data integrity
The drive retains recorded information under all non-write operations.
N o more than one sector can be lost by power down during write operation while write cache is disabled.
If power down occurs before completion of data transfer from write cache to disk while write cache is
enabled, the data remaining in write cache will be lost. To prevent this data loss at power off, the following
action is recommended:
To confirm successful completion of SYNCHRONIZE CACHE (35h) command.
4.1 Equipment Status
Equipment status is available to the host system any time the drive is not ready to read, write, or seek. This
status normally exists at power-on time and will be maintained until the following conditions are satisfied.
Access recalibration/tuning is complete.
Spindle speed meets requirements for reliable operations.
Self-check of drive is complete.
Appropriate error status is made available to the host system if any of the following condition occurs after
the drive has become ready:
Spindle speed goes outside of requirements for reliable operation.
“Write fault” is detected.
4.2 Error Recovery
Errors occurring with the drive are handled by the error recovery procedure.
Errors that are uncorrectable after application of the error recovery procedures are reported to the host
system as non-recoverable errors.

Copyright IBM Corp. 1997
17