IBM DDRS-39130 - Ultrastar 9.1 GB Hard Drive, Specifications

Page: 217 / 228

nated without altering the medium. If an invalid parameter is found in parameters supplied
as data, then the file might have altered the medium.
6h Unit Attention
Indicates that the file entered in the 'Unit Attention Condition'. (See 10.1.5, “Unit Atten-
tion Condition” on page 183.)
7h-8h Not used
9h Vendor Specific
Ah Not used
Bh Aborted command
The file aborted the command.
Ch-Dh Not Implemented
Eh Not Used
Fh Reserved
12.2.5 Information Bytes (Byte 3 thru 6)
This field is only valid when Valid Bit is one.
LIL = 0 : This field contains the unsigned LBA associated with the sense key. The LBA reported will
be within the LBA range of the command as defined in the CDB.
Note: An LBA other than the command LBA may be reported on the Reassign Block (07h)
command.
LIL = 1 : This field contains the difference (residue) of the requested length in bytes. Negative values
are indicated by two's complement notation.
12.2.6 Additional Sense Length (Byte 7)
Indicates the remaining number of bytes in the sense data. (It is always set to 18h.)
12.2.7 Command Specific Information (Byte 8 thru 11)
The values in this field vary with products. Please see the product specific specification for more details.
SCSI SENSE D A T A
207