IBM Aptiva 2162 Series, Hardware Maintenance Service, Page: 76 / 222

Table 2-1 (Page 13 of 27). POST and Diagnostics and Utilities Index
for Symptoms, Messages, Error Codes, or Beeps
Symptoms, Messages, Error
Codes, or Beeps Action/FRU
Program or File
Not Found
Press Any Key
Diagnostics cannot find the
USER(N).COM file.
Diagnostic CD or diskette
CD-ROM Drive or Diskette Drive
Media Console
Media Console host card
Media Console client card
Media Console cable
System Board
Program Too Big To Fit In
Memory.
Too many Terminate and Stay
Resident programs in memory. Reboot the system from the Diagnostic CD.
QAPlus/PRO Cannot Be Re-run
Because Of Error In Relocating
Program.
Diagnostics failed to relocate the
Diagnostics Test programs so
the memory space it resides in
was not tested. Diagnostic CD
Memory DIMM
System Board
RAM Memory Error in Block n.
Bad bits n.
Memory error. Memory DIMM
System Board
RAM Test Failed.
Memory error. Memory DIMM
System Board
Read error on cylinder n.
Hard disk drive format error. Hard Disk Drive
System Board
Read Errors
Diskette drive read error. Diskette
Diskette Drive
Media Console
Media Console host card
Media Console client card
Media Console cable
System Board
Diskette Drive Cable
Real-time clock is inaccurate. Time set incorrectly by user.
RTC battery (if less than 2.8 V dc)
System Board
Receive Error.
Serial Port loopback test error. Serial Port Cable
System Board
2-22