IBM Aptiva 2162 Series, Hardware Maintenance Service, Page: 62 / 222

(continued)
014 (continued)
– The Easy Test Diagnostics did not detect a failure. If the system still
displays a failure:
Ÿ
Check all adapter card jumper settings.
Ÿ
Check all adapter card switch settings.
Ÿ
Check all adapter card cables and connectors for proper installation.
Ÿ
Check Media Console host card for proper installation.
Ÿ
Check Media Console client card and cable for proper installation.
Ÿ
Make sure all of the above are set correctly and show the correct
voltages and continuity. Replace any defective cables or adapter
cards. See “Power Supply” on page 2-37, and “System Board
Layout” on page 5-2.
– Run the Easy Test Diagnostics again.
– If an error or other symptom is displayed, go to “Index of Symptoms,
Messages, Error Codes, or Beeps” on page 2-9.
– If no error can be detected or the symptom is intermittent, go to
“Undetermined Problem” on page 2-69.
2-8