IBM Aptiva 2162 Series, Hardware Maintenance Service, Page: 65 / 222

Table 2-1 (Page 2 of 27). POST and Diagnostics and Utilities Index
for Symptoms, Messages, Error Codes, or Beeps
Symptoms, Messages, Error
Codes, or Beeps Action/FRU
Bus Noise Test Failed.
RAM Test detected an error in
the memory bus. Memory DIMM
System Board
Butterfly Cylinder Access Test
Failed.
Hard Disk Drive Test detected
mismatch between the data read
and the data stored on the drive. Hard Disk Drive
Hard Disk Drive Cable
System Board
Cannot finish diagnostic test. “Diagnostics and Utilities Device Presence
Test” on page 2-45.
CD-ROM drive LED came on
and stayed on more than 20
seconds before shutting off.
Software asks to install disc.
Software displays a
Reading CD
error .
CD is not inserted properly.
CD is damaged.
CD has dirt or foreign material on it.
CD-ROM drive cable.
CD-ROM drive LED comes on
when inserting a disc but no
CD-ROM drive icon appears in
the File Manager as Drive D. “Factory-Installed Drive Devices” on
page 2-49.
CD-ROM drive connections/cables/jumpers
CD-ROM drive
Media Console
Media Console host card
Media Console client card
Media Console cable
CD-ROM drive LED does not
come on when inserting a disc in
the drive when the system is
powered on and the CD-ROM
drive power connector has the
correct voltage. “Diagnostics for Factory-Installed Riser
Card, and Sound Card” on page 2-55.
CD-ROM drive
Media Console
Media Console host card
Media Console client card
Media Console cable
CD-ROM drive LED does not
come on but CD-ROM drive
works normally. CD-ROM drive
Check Procedures
2-11