IBM Aptiva 2162 Series, Hardware Maintenance Service, Page: 107 / 222

003 (continued)
IS
(device) not ready--(A)bort or (R)etry DISPLAYED WHILE
SOFTWARE IS LOADING?
Yes No
004
Go to Step 009 on page 2-54.
005
– If a (device) not ready--(A)bort or (R)etry message appears, press A
to cancel the message and continue.
– The Windows 95 Desktop should appear. (If you make the wrong
selection in Microsoft Windows 95, return to Step 003 on page 2-52 and
try again.)
– In the Windows 95 Desktop, double-click on the My Computer icon.
– With the My Computer icon open, verify that the drive device you wish to
check is in the window with the other drives.
IS THE DRIVE DEVICE LISTED AS ONE OF THE INSTALLED DRIVES?
Yes No
006
– Ensure all drive device cables are connected properly.
– Ensure the power connector has the correct voltage (see “Power
Supply” on page 2-37).
– Check continuity of the drive device system cable, and replace if
necessary.
– Replace the drive device.
007
– Install a known good media in the drive.
– Click on the drive icon at the top of the File Manager window.
DOES THE FILE MANAGER PANEL CHANGE TO LIST THE CONTENTS
OF THE DRIVE?
Yes No
008
Note: If the message No files found for the CD-ROM drive is
displayed, you may have an audio CD installed. Be sure you
are using a CD-ROM disc, not an audio CD.
(Step 008 continues)
Check Procedures
2-53